Original Title: TC4 Titanium Bar-GR5 Titanium Alloy Bar-Ti6Al4V Titanium Bar TC4 titanium rod is also known as: GR5 titanium bar, composition (Ti6Al4V) TC4-Ti6Al4V-GR5 titanium alloy rod has a series of advantages such as excellent corrosion resistance, low density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. TC4 Titanium Alloy Bar, GR5 Titanium Bar, Ti6Al4V Titanium Bar Specifications: Diameter (3.0300) mm × L TC4 Titanium Alloy Bar, GR5 Titanium Bar, Ti6Al4V Titanium Bar Application Range: Petroleum, chemical, aerospace,3d titanium wire, shipbuilding, pharmaceutical and other industries TC4 titanium alloy bar, GR5 titanium bar, Ti6Al4V titanium bar Executive standard: GB: GB/T2965-2007, GB/T13810-2017 ASTM B348, ASTM F136,Titanium 6Al4V wire, ASTM F67, AMS4928 Supply status: hot working status, annealing status The TC4 titanium alloy can be made into forging products such as TC4 titanium rods, TC4 titanium tubes, TC4titanium plates, TC4titanium wires, TC4titanium rings, TC4titanium cakes and TC4titanium alloy blocks. Reference standards for TC4 titanium bar, GR5 titanium alloy bar and Ti6Al4V titanium bar: GB 228 Metal Tensile Test Method GB/T 3620.1 Titanium and Titanium Alloy Bars Designation and Chemical Composition GB/T3620.2 Titanium and Titanium Alloy Bars and Wrought Products-Chemical Composition and Permissible Variations for Composition GB 4698 Methods for Chemical Analysis of Sponge Titanium, Titanium and Titanium Alloys Technical requirements for TC4 titanium bar, GR5 titanium alloy bar and Ti6Al4V titanium bar: The chemical composition of titanium and titanium alloy bars shall conform to the provisions of GB/T 3620.1. When repeated inspection is required, 6al4v titanium bar ,titanium filler rod, the allowable deviation of chemical composition shall conform to the provisions of GB/T 3620.2. The diameter or side length of hot-worked bars and their allowable deviations shall conform to the provisions in Table I. After hot processing, the bars shall be turned (ground) and cold rolled, and the allowable diameter deviation of cold-drawn bars shall conform to the industrial regulations. After hot working, the out-of-roundness of the bar after turning (grinding) shall not be greater than half of its dimensional tolerance. The indefinite length of the bar in the processing state is 300-6000mm, the indefinite length of the bar in the annealing state is 300-2000mm, and the fixed length or multiple length shall be within the range of indefinite length. Allowable deviation of fixed length is + 20mm; the multiple length shall also be included in the cut amount of the bar , the amount of each cut is 5mm. Length of fixed length or multiple length shall be indicated in the contract 。 Expand the full text Application of TC4 titanium bar, GR5 titanium alloy bar and Ti6Al4V titanium bar: Aerospace, aviation, navigation, ship, seawater desalination, petroleum, chemical industry, mechanical equipment, nuclear power equipment, electric power equipment, automobile and motorcycle parts, sports and leisure, medical parts, steel and metallurgy, high-tech fields. Melting method and process of titanium materials such as TC11 titanium rod, TC4 titanium rod and titanium alloy rod With the development of science and technology and the improvement of people's living standards, titanium is used more and more in industrial production, aerospace, national defense and military industry, as well as daily life, so the requirements for the performance of titanium and titanium alloys are getting higher and higher. The melting of titanium alloy raw materials is undoubtedly the most important and key link, the quality of its melting directly affects the performance of the finished products of subsequent processing whether to meet the product requirements, thus promoting the development of modern melting technology of titanium alloy, including the development of new technologies such as electron beam, plasma cold hearth furnace and so on. It creates a good condition and basis for improving the metallurgical quality and mechanical properties of titanium alloy ingots. TC4 titanium bar, GR5 titanium alloy bar, Ti6Al4V titanium bar TC4 titanium bar, GR5 titanium alloy bar, Ti6Al4V titanium bar TC4 titanium bar, GR5 titanium alloy bar,ti6al4v eli, Ti6Al4V titanium bar TC4 titanium bar, GR5 titanium alloy bar, Ti6Al4V titanium bar TC4 Titanium Alloy Rod Standard Requirements and Uses Return to Sohu to see more Responsible Editor:. yunchtitanium.com