Like any machine, there will be one or the other problems in use, such as all kinds of bending process, how many there will be some such as: The bending corner of the pipe bounces back, the bending pipe wrinkles, bumps and drag marks and other problems, today the station and mechanical experts for you to talk about the operation process of automatic cnc pipe end forming machines common problems, In practice, we must pay attention to:

1. When fully automatic starting, pay attention to the scope that the body cannot enter the swivel arm rotation. In the CNC lathe work, all staff prohibited into the rotary arm and pipe swept indoor space category, CNC lathe hydraulic transmission system use YA-N32 general gear oil, under normal circumstances over the years to disassemble many times, the oil filter must be cleaned together.

2, adjust the grinding tool, should be by the adjuster press the button to carry out the adjustment, dry million can not be a person to adjust the CNC lathe, others in the control box actual operation, adjust the CNC lathe or open empty car to remove the core rod. The hydraulic transmission system must also pay attention to the size of the working pressure in actual operation.

3, the other is strictly prohibited in the case of manual side pushing speed more than the angular speed of the rotating grinding tool edge. Generally, the tension level of the transmission chain should be checked after a period of time, and the tightness of the upper and lower left and right transmission chain should be maintained.

4, automatic actual operation in the core bending mode, before the bending arm returns, the actual operation staff must ensure that the core head is in the water pipe, or ensure that the core rod is in the bending arm returns

performance of automatic cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming